Product presentation
The product is an acrylic paint prepared by acrylic emulsion, high quality pigment, filler, auxiliary agent, deionized water, etc
Recommended use
The paint film has excellent adhesion
Paint film drying speed, high solid content, early water resistance is good, suitable for cast iron, corner frame, shelf, C steel, H steel coating
Using water as diluent is easy to construct and is an environmentally friendly product
Technical index
| Color |
Iron red, medium grey |
| Flash |
zero |
| Mass solid content |
>53%(medium ash) |
| Specific gravity |
1.50kg/L (medium grey) |
| Theoretical coating rate |
8m2/kg(30 micron dry film) |
| Adhesion |
level 1 |
All data is based on medium gray, other colors are referenced to this data
General description of construction
1. Before spraying, clean the oil, rust and old patent leather on the surface of the coated material and keep it clean
2, sandblasting to Sa2.5, manual (electric steel brush) grinding to St3. Welding cutting or fire school is burning parts: after removing welding slag, splash, grinding, grinding manually (electric steel brush) to St3 level
3, before use, should make water or water-based gun cleaning agent to clean the gun. If the gun has a certain length of feed pipe, it is necessary to use a large amount of water-based gun cleaner into the pipe cleaning. After spraying, clean the gun with clean water.
4, the relative humidity of the construction environment should not be higher than 80%, the substrate and construction environment temperature should not be less than 5 degrees Celsius and at least should be higher than the air dew point humidity of more than 3 degrees Celsius, low temperature and high humidity weather, auxiliary ventilation equipment can be used to ensure normal drying.
Construction parameter
| diluter |
clean water |
| dilution rate |
10-20% (Air spray) |
| Drying method |
Natural drying |
Time of drying
Ventilation conditions, temperature, film thickness, number of coating passes and other factors will affect the drying time. The typical data listed in the following table is based on the following conditions:
* Good ventilation (outdoor or natural air circulation)
* Film thickness is 30 microns
* Single coat on an inert substrate
Substrate temperature 10ºC 23ºC 40ºC
Surface stem (h) 1 0.5 0.3
Work (h) 24 16 4
The actual drying time/time interval before coating can be long or short depending on film thickness, ventilation, humidity, base paint, advance handling requirements and mechanical strength
Supporting Production
Water-based steel structure: 30 microns (dry film thickness)
Other supporting facilities can be developed according to specific circumstances
Preservation store
According to HG/T2458, store in dry, ventilated, cool and away from fire source, heat source environment, effective storage period of one year. Beyond the storage period, it can be inspected according to the items specified in this standard. If the results meet the requirements, it can still be used.
Packing specification
15 kg in a 20-liter container
){kind=link}