High-Performance Anionic Type Water-Based Acrylic Thickening Agent for Latex Paint HD6080

• Customization: Available
• Molecular Principal Chain: Carbon Chain Polymer
• Application: Thickening Agent for Water-Based Coating
• Solid Content: 30+-1wt%
• pH: 2.0-4.0
• Viscosity.Cps: <=100cps
• Feature1: Good Thickening Effect
• Feature2: Strong Thixotropy
• Transport Package: Plastic Barrel
• Specification: 1 ton
• Trademark: huide
• Origin: China
• HS Code: 39069090
• Production Capacity: 80000tons Per Year

Product Description

INTRODUCTION:

HD6080 is an anionic hydrophobic modified alkali swelling association thickener, suitable for all kinds of water-based products, mainly to increase medium and high shear viscosity, with good fluidity, leveling and splash resistance, emulsion phase thickening rate is high, small dosage, good dilution resistance, stable storage, anti-mildew, with good formula applicability. After thickening is

very small, the product with the thickening agent has low shear viscosity. Generally stirring 5-10
minutes to reach the final viscosity of more than 90%.


FEATURES :

1:  can be directly drawn into the emulsion or paint, the final product PH value should be above 7 thickening effect is obvious, Ph value below 7 should be added  water and other alkaline substances, so that the PH value is adjusted to more than 7. Otherwise the thickening effect is poor.

2: The thickening agent is generally shared with other thickening agents, and the amount of time
 used alone accounts for about 0.8%-- 0.9% of the weight of the latex paint, and the actual addition amount is
subject to the viscosity of the latex paint required. The thickening agent has no effect on gloss and scrubbing resistance when added to latex paint.

APPLICION:

Applicable to all kinds of water-based paint, water-based sealant, water-based ink, water-based

printing and dyeing paste and other water-based system

 

SPECIFICATIONS/CHARACTERISTICS	DATA/VALUE
chemical composition	Milky white  liquid
Solid content	33%±1
viscosity(25ºC# rotor 6 RPM) :	>50 m Pa.s
PH	3-4.5
Thickening viscosity (25ºC# rotor 6 RPM) :	>7000 m Pa.s

PACKAGE:
The packaging is 200kg plastic drum and 1000kg ton drum. This product should be stored in a ventilated and dry room to prevent

Direct sunlight exposure, transport and storage at 5-35° C, the effective storage period is six months from the date of packaging.

Our Products

Through the ISO9001 quality system certification, the company has established a talent structure that ADAPTS to its own development, and formed an open, communication and common development mode with users.In the domestic market has obtained a certain share, and with a part of the domestic important large enterprises, Sino-foreign joint ventures, foreign-funded enterprises to establish a good relationship of cooperation.The products are widely used in building latex paint, polymer cement, waterborne wood paint, waterborne metal paint, etc., with an annual production capacity of 30,000 tons.The company has established and improved a complete system from product development, quality to customer service and a nationwide sales network in major regions.

 

Over the years, with strong technical strength, high-quality and mature products, and perfect service system, we have achieved rapid development, and the technical indexes and practical effects of its products have been fully affirmed and praised by the majority of users, and obtained the certificate of high-quality products, and have become a well-known enterprise in the industry.


 

What are your prices?

Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.

Do you have a minimum order quantity? 

Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
.
Can you supply the relevant documentation?Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

What is the average lead time?For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.

What kinds of payment methods do you accept?can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.

What is the product warranty?We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction.

Do you guarantee safe and secure delivery of products?Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.

How about the shipping fees?The shipping cost depends on the way you choose to get the goods. Express is normally the most quickest but also most expensive way. By seafreight is the best solution for big amounts. Exactly freight rates we can only give you if we know the details of amount, weight and way. Please contact us for further information.