Industrial Paint Coatings Waterborne Polyurethane Finish Factory Production

Product Description

Product characteristics:
1, dilute with water, safety and environmental protection
2, non-hazardous chemicals, product transportation is not restricted by hazardous chemicals
3, dry at room temperature or low temperature baking, paint film adhesion is strong
4, good corrosion resistance
Scope of application:
It is suitable for the maintenance of new steel structure and original structure. Suitable for a variety of environments, including offshore facilities, chemical and petrochemical plants, bridge paper
Factory, power plant, etc. It is suitable for the surface coating of large steel structures such as Bridges, storage tanks, iron containers and steel workpieces in medium corrosive environment
As well as factories, power stations and other pipelines, equipment and steel structure painting, can also be used for concrete surface painting.

Packaging specifications	basic parameters
Packing size	20kg+4kg/ group
Theoretical coating rate	120-150g/m2 /100 micron
Coating thickness	>35μm

General description of construction
Surface treatment: All surfaces to be coated should be clean, dry and pollution-free, and the primer surface should be dry and pollution-free
Spalling and damaged areas are treated according to standard as necessary. Welds and damaged areas should be sprayed, if the workshop primer has a large range of peeling, it needs a comprehensive sand sweeping treatment

Coating construction: This product is divided into two cans to form a unit, which must be mixed in pairs at one time according to the specified ratio, and used up within the specified mixing period.

Mixing ratio: Main agent: curing agent = Main agent: curing agent =5:1(weight ratio)(mass ratio)

Airless spraying nozzle is recommended: Chongqing Changjiang 26B25, 17B25; Air pressure :19.5-39MPa

Recommended air spray gun :W-77; Air pressure :8MPa

Brush coating: Suitable - limited to a small range, typical thickness 30-40 microns

Roller coating: Suitable - limited to a small range, typical thickness of 30-40 microns

Diluent: Deionized water is recommended, and pollution-free tap water can also be used to dilute

Dilution ratio :0-10%

Environmental requirements Minimum operating temperature :5 ° C

The former supporting paint: waterborne anti-corrosion primer, waterborne medium paint;
Maximum construction humidity :RH85%

The former supporting paint: waterborne anti-corrosion primer, waterborne medium paint;

Cleaning: Clean all equipment with tap water immediately after use. Solvent-based diluent is strictly prohibited



                                                                  FAQ

What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website

Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so

What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.

What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction

Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
HIGH GRADE WHOLESALE STYRENE ACRYLIC COPOLYMER EMULSION CAS   025586-20-3
STYRENE ACRYLIC EMUSLION 
WHOLESALE STYRENE ACRYLIC EMUSLION 
SUPPLIERS STYRENE ACRYLIC EMUSLION 
CHINA STYRENE ACRYLIC EMUSLION