Acrylic Resin Emulsion That Can Be Used for Car Exterior Paint

Product Description

Product Introduction:

Made of special water-based resin, imported water-based silver paste, functional additives and other materials, refined by advanced technology, the paint film appears like hammer marks left after hammering, high gloss, exquisite pattern, soft color, tough and durable. It can cover up the rough and uneven defects of various mechanical surfaces, play an artistic decorative effect, and the construction is convenient, and the spraying process is easy to master.

Application field:

Light and heavy equipment, machine tools, instruments, iron doors, iron cabinets and other decorative coating.

Construction description
1. Before painting, clean the oil, rust, old patent leather and other dirt on the surface of the substrate to ensure that the surface of the substrate is clean and dry.
2. Grinding wheel is used to remove welding bumps, spatter and hardened layer on the surface of the workpiece. All free edge acute angles after gas cutting, shearing or mechanical addition should be polished to R2.
3. Brush coating, spraying, rolling coating method can be used for construction, the paint should be stirred evenly before painting, if the viscosity of the original paint is high, a small amount of water can be added appropriately, the amount of water should not exceed 10%, should be added while stirring to ensure that the paint is uniform;
4. During the construction, the paint film can be self-drying or low temperature drying. The drying condition temperature shall not be lower than 5 degrees Celsius and the humidity shall not be higher than 85%; When drying, the room temperature flow flat time is not less than 15 minutes, the baking temperature is 80 degrees Celsius, not less than 20 minutes;
5. During construction, it is strictly prohibited to mix with other paints and organic solvents to prevent deterioration, after the construction, all appliances should be immediately washed with water, < dry solid, the remaining paint should be airtight, if there is dry skin, affecting the use, you can filter with 100 mesh mesh before use.
Rain, snow and fog weather can not be constructed outdoors, such as construction can be covered by tarpaulin and other methods to protect the paint film.

Storage and Transportation:
1. The product should be sealed and stored in a dry and well-ventilated warehouse, with a storage temperature above 0 ° C and below 40 ° C, to prevent water immersion, direct sunlight, and to isolate the source of goods from heat sources.
2. If the product meets the storage conditions, the storage period is 12 months from the date of production, and the storage period can be tested beyond the storage period. If it meets the standards, it can still be used.
3. During the transportation process, the product should be prevented from cold, rain and sun exposure, and should comply with the relevant provisions of the transportation department.

Technical parameters:

entry	index	Detection method
Paint film color and appearance	Smooth and smooth color in line with standard template	Eye test
Solid content %	≥40	GB/T1725
Fineness um	≤30	GB/T1725
Drying time (h)	Surface dry ≤0.5 Practical dry ≤24	GB/T1725
Hardness (pencil)	≥HB	GB/T6739
Flexibility mm	≤1	GB/T1731
gloss	agree	GB/T1743
Impact resistance kg.cm	50	GB/T1732
Adhesion grade	≤1	GB/T1725
Water resistance	7 days no foaming, no shedding, allow slight discoloration	GB/T1733
Salt water resistance	7 days no foaming, no wrinkle, no shedding, allow slight discoloration	GB/T1763

Company Profile

Xuzhou Huide Chemical Co., Ltd. is located in xuzhou, jiangsu, the largest transportation hub city in China.

The transportation is very convenient.Since its establishment, the company has been committed to the research and production of emulsion resin, always adhere to the direction of environmental protection and ecological research, market demand as the driving force for development, continuous innovation, to provide many excellent products for the majority of users.Our products are well known throughout China and have been sold all over the country.

The main products of the company are acry-lic acid series, tertiary vinegar series, tertiary propyl series, silicon propyl series, fluorocarbon series, etc.We constantly absorb the world's formulas, processes and raw materials to create products, our research and development is in sync with the world.

Our Products
Through the ISO9001 quality system certification, the company has established a talent structure that ADAPTS to its own development, and formed an open, communication and common development mode with users.In the domestic market has obtained a certain share, and with a part of the domestic important large enterprises, Sino-foreign joint ventures, foreign-funded enterprises to establish a good relationship of cooperation.The products are widely used in building latex paint, polymer cement, waterborne wood paint, waterborne metal paint, etc., with an annual production capacity of 30,000 tons.The company has established and improved a complete system from product development, quality to customer service and a nationwide sales network in major regions.

 

 

Over the years, with strong technical strength, high-quality and mature products, and perfect service system, we have achieved rapid development, and the technical indexes and practical effects of its products have been fully affirmed and praised by the majority of users, and obtained the certificate of high-quality products, and have become a well-known enterprise in the industry.


 

FAQ

What are your prices?

Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.

Do you have a minimum order quantity? 

Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
.
Can you supply the relevant documentation?Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

What is the average lead time?For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.

What kinds of payment methods do you accept?can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.

What is the product warranty?We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction.

Do you guarantee safe and secure delivery of products?Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.

How about the shipping fees?The shipping cost depends on the way you choose to get the goods. Express is normally the most quickest but also most expensive way. By seafreight is the best solution for big amounts. Exactly freight rates we can only give you if we know the details of amount, weight and way. Please contact us for further information.