Waterborne Acrylic Emulsion for Inorganic Floor Paint

Product Description

company profile:

Xuzhou Huide New Material Technology Co., Ltd. is a high-tech enterprise specializing in R&D, production and sales of water-based acrylic polymers and supporting additives. The company's products are widely used in architectural decorative coatings, adhesives, building sealants, waterproofing, metal rust prevention, soil and sand curing, water-based paints and other fields. The company continues to improve the performance level and price advantage of water-based polymers in production and research, aiming to provide the market with more healthy and environmentally friendly, low-VOC or even no-VOC solutions.

                                       
Product Highlights Overview

Water-borne inorganic floor paint is made of inorganic resin based film forming material, adding a variety of environmental protection auxiliary components. hardness Super high, up to 4H; Good adhesion with substrate, tensile bond strength up to 4.9MPa; In a way It has waterproof effect, and has strong color retention and durability. In accordance with international standards The test results are in accord with the standard requirements.
 

Version : 3011  floating coat

test for adhesive force

thickness: 2mm

Version : 3011  floating coat

hardness test : ≥ 2H

Version : 3011  floating coat


Water resistance test : No primer, two medium coats (untoned 200μm) The test results can reach 20,000 times of scrubbing resistance

                             
                                  3011 Inorganic floor paint paint test value
 

test item	result	descr
viscosity	95±3KU	Stromer viscometer test
pH value	9.5	pH paper test
glossiness	3±0.5°	60°angle
hardness	4H	Mitsubishi pencil hardness
covering power	90±1%	C84-111 reflectance measuring instrument test
adhesive force	Lv. 0	White grid, level 0 is the best, level 5 is the worst
Water resistance adhesion	Lv. 1	White grid, level 0 is the best, level 5 is the worst

geothermal reservoir	normal	50ºC,30 day
store away in winter	normal	ternary cycle
600μm thick coating	non-cracking

water-tolerant	normal	White paint test 48h
ethanol-tolerance	normal	White paint test 48h
Soy sauce tolerance	It's stamped. It's light	White paint test 48h
Pepper resistant oil	It's stamped. It's light	White paint test 48h

Toning stability	normal	50ºC,30 day
Heat storage 30 days scraper	normal	50ºC,30 day
tensile adhesive strength	>4.9MPa	Normal temperature curing for 7 days test

           
               Comparison of 3011 inorganic floor paint and epoxy floor paint

 

Contrast item	WJ-3011 Inorganic floor	epoxy floor coating
environmental protection	Water-based single component, non-toxic and odorless	The VOC is higher, and the pungent smell is stronger
abrasive resistance	The wear coefficient is 0.01	Wear coefficient 0.03-0.05
delamination resistance	The adhesion is 0, and the tensile bond strength can reach 4.9MPa	Picking substrate, high humidity construction is easy to delamination
Super weather resistance	Ultraviolet light exposure >400h, powder ≤1, discoloration ≤2	Ultraviolet radiation is easy to age and powder

Short construction period, simple maintenance, low maintenance cost

The opening time of single component is long, the construction interval between layers is short, and it can adapt to a variety of substrate construction

The two-component opening time is short, the substrate requirements are high, and the humidity requirements are high

our advantages



Inorganic floor system formulation (Inorganic penetrant primer)

In an inorganic floor penetrant primer, we built Part of the modified lithium silicate component is added, which There are several benefits:

1, high permeability, can penetrate into the deep base Wood reinforcement.

2, good water resistance, condensation of lithium silicate Should be irreversible, unlike potassium       silicate drying Regret redissolving in water

3.anti-scratch : Easy to remove key scratches

4.anti-scratch

5.Good weather resistance, can be used as an outdoor floor solution
Resistance to artificial climate aging after 800h (equivalent to natural 10 years), the difference between inorganic mineral coatings and ordinary floor coatings

6.Water-borne and easy to erase


construction method:

one.Base surface treatment

1, the basic ground to cement powder smooth surface or grinding stone ground shall prevail.

2, the base surface needs to be maintained for more than 28 days, the moisture below 8% can be constructed, the base surface has joints, depressions,Empty drums need to be handled well in advance and ensure dry, otherwise it will cause cracking in the later stage.

3, thoroughly clean the ground oil.

4, grinding, remove loose layer delamination, cement residue, etc.

5. Make sure the base surface is clean and dry before construction.


two.Primer application

1, roller coating or spraying primer, drying for more than 4 hours; Construction pay attention not to residual fluid accumulation.

2, if the local peeling phenomenon is found, the reason is caused by oil on the cement surface, the peeling part will be played Rub off and reapply a clear primer to the roller.

3, brushing area :10-12m/KG.


three.Medium paint roll coating or spray coating

1.Medium paint roller coating or spray, dry for more than 4 hours. Dosage 4.5-5.5m/ twice /KG


four.Roller paint or brush paint

1, roll or brush paint, dry for more than 24 hours.


five.Inorganic finish roll coating or spray coating

1, roll coating or spraying inorganic finish.

2, roll coating roller must be clean; If sprayed, clean the gun with water.

3, can be wet wet roller coating or spraying twice.

4, inorganic surface can not be repainted after practical work.

5. Dosage 10-12m/KG.

6, maintenance 5-7 days can be used normally.

Physical display:
 

 

 

                                                                  FAQ

What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website

Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so

What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.

What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction

Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
HIGH GRADE WHOLESALE STYRENE ACRYLIC COPOLYMER EMULSION CAS   025586-20-3
STYRENE ACRYLIC EMUSLION 
WHOLESALE STYRENE ACRYLIC EMUSLION 
SUPPLIERS STYRENE ACRYLIC EMUSLION 
CHINA STYRENE ACRYLIC EMUSLION