Inorganic Floor Paint Is Simple in Operation and Convenient in Construction

• Customization: Available
• CAS No.: None
• Formula: None
• Model NO.: HD1006
• EINECS: None
• Color: White
• Appearance: Liquid
• Main Raw Material: Acrylic
• Method: Roller
• Level: Finish Coat
• Drying Method: Air Drying
• Certification: ISO14001, CCC, RoHS, ISO9001
• Substrate: Steel
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Characteristic: Environmental Protection
• Solid Content: 47±1%
• Delivery Time: 5-7day
• Minimum Film Formation Temperature: 23ºC
• Gtt(Glass-Transition Temperature): 25ºC
• Transport Package: Barrel
• Specification: 50 kg/barrel, 200 kg/barrel and 1 ton /IBC barrel
• Trademark: huide
• Origin: China
• HS Code: 39069090
• Production Capacity: 300, 000 Tons Per Year

Product Description

Inorganic coatings for exterior walls in Switzerland
 

The characteristics of the company's products:

it has good permeability, can penetrate into the pores of the floor base, effectively enhance the adhesion between the floor paint and the ground, so that the subsequent floor paint coating is more firmly attached to the floor surface, reducing the risk of peeling.

This primer has high chemical stability and excellent alkaline resistance. When there may be alkaline substances leaking out of the floor, it can play an isolating role to prevent alkaline substances from causing damage to the floor paint.

Inorganic floor paint transparent primer also has environmental protection properties. Compared with some organic coatings, it contains a lower volatile organic compound (VOC) content, reducing indoor air quality pollution, but also more in line with the concept of environmental protection.

In addition, it has good water resistance, and can prevent water penetration in the environment where the floor is in contact with more water, and protect the floor from water erosion and damage.
                                       
Product Highlights Overview

Water-borne inorganic floor paint is made of inorganic resin based film forming material, adding a variety of environmental protection auxiliary components. hardness Super high, up to 4H; Good adhesion with substrate, tensile bond strength up to 4.9MPa; In a way It has waterproof effect, and has strong color retention and durability. In accordance with international standards The test results are in accord with the standard requirements.
 

                             
                                1006 Inorganic floor transparent bottom test value
 
           

test project	result	remark name
viscosity	/
PH value	9.5	pH paper test
hardness	2H-3H	pencil hardness
adhesive force	Lv. 0	White grid. Level 0 is best. Level 5 worst
geothermal reservoir	normal	50ºC  30 day
Frozen storage	normal	3 cycles
Sand fixation effect	good
Permeation effect	good
tensile adhesive strength	>4.9MPa	Normal temperature curing for 7 days test

         

1006  primer


Ruggedization test

1006  primer



hardness test


 

 
our advantages



Inorganic floor system formulation (Inorganic penetrant primer)

In an inorganic floor penetrant primer, we built Part of the modified lithium silicate component is added, which There are several benefits:

1, high permeability, can penetrate into the deep base Wood reinforcement.

2, good water resistance, condensation of lithium silicate Should be irreversible, unlike potassium       silicate drying Regret redissolving in water

3.anti-scratch : Easy to remove key scratches

4.anti-scratch

5.Good weather resistance, can be used as an outdoor floor solution
Resistance to artificial climate aging after 800h (equivalent to natural 10 years), the difference between inorganic mineral coatings and ordinary floor coatings

6.Water-borne and easy to erase


construction method:

one.Base surface treatment

1, the basic ground to cement powder smooth surface or grinding stone ground shall prevail.

2, the base surface needs to be maintained for more than 28 days, the moisture below 8% can be constructed, the base surface has joints, depressions,Empty drums need to be handled well in advance and ensure dry, otherwise it will cause cracking in the later stage.

3, thoroughly clean the ground oil.

4, grinding, remove loose layer delamination, cement residue, etc.

5. Make sure the base surface is clean and dry before construction.


two.Primer application

1, roller coating or spraying primer, drying for more than 4 hours; Construction pay attention not to residual fluid accumulation.

2, if the local peeling phenomenon is found, the reason is caused by oil on the cement surface, the peeling part will be played Rub off and reapply a clear primer to the roller.

3, brushing area :10-12m/KG.


three.Medium paint roll coating or spray coating

1.Medium paint roller coating or spray, dry for more than 4 hours. Dosage 4.5-5.5m/ twice /KG


four.Roller paint or brush paint

1, roll or brush paint, dry for more than 24 hours.


five.Inorganic finish roll coating or spray coating

1, roll coating or spraying inorganic finish.

2, roll coating roller must be clean; If sprayed, clean the gun with water.

3, can be wet wet roller coating or spraying twice.

4, inorganic surface can not be repainted after practical work.

5. Dosage 10-12m/KG.

6, maintenance 5-7 days can be used normally.

Physical display:
 

 

 


                                                                  FAQ

What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website

Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so

What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.

What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction

Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
HIGH GRADE WHOLESALE STYRENE ACRYLIC COPOLYMER EMULSION CAS   025586-20-3
STYRENE ACRYLIC EMUSLION 
WHOLESALE STYRENE ACRYLIC EMUSLION 
SUPPLIERS STYRENE ACRYLIC EMUSLION 
CHINA STYRENE ACRYLIC EMUSLION